HHP-M main features

 

HHP-MU

HHP-MWThe model HHP-MU is derived from the type HHP-NU where the active area size is minimized to 0.1 x 0.1 mm. This probe covers a magnetic field range up to 5 Tesla with a temperature range of 1.5 - 350 K. It has high sensitivity and the miniature active area size. The enhanced accuracy makes the probe applicable in sample homogeneity characterization and microstructure - related magnetic field studies. Its small overall dimensions make it ideally suited for space-limited applications. The model HHP-MW is probe with overall dimensions of 5 x 4 x 0.9 mm partially protected by a resin enclosure, but the electrical system remains uncovered. Distance between the surface of the active area and the probe's surface is 150 mm.

HHP-MP

HHP-MPThe model HHP-MP features transverse mounting construction with the same electrical specifications as the type HHP-MW. The active area center of this packaged sensor is properly marked by a cross, located with accuracy better than ± 0.05 mm. Overall dimensions are 7 x 5 x 1 mm. The model HHP-MP is a probe covered by special synthetic resin in the transverse modification and electrical system is parallel to the undersurface with higher accuracy.

HHP-MA

HHP-MAThe model HHP-MA characterizes axial mounting construction with same electrical specifications as the model HHP-MW. A cross, located with accuracy better than ± 0.05 mm, properly marks the active area center of the packaged sensor. The overall diameter is 7 mm. The model HHP-MA is a probe covered by cryogenic synthetic resin in axial modification and its electrical system is parallel to the front wall of the cover with the highest precision.

HHP-MFO

HHP-MFOThe HHP-MFO model is similar to the HHP-MF model. This Hall probe is partially protected by a resin enclosure, but the electrical system remains uncovered. Overall diameter is 7 mm. This construction allows decreasing the distance between the surface of the active area and the probe's surface to 150 microns.

HHP-MT

HHP-MTThe HHP-MT model is developed for operation at a temperature range of 1.5 - 350 K in magnetic fields up to 5 T. Dimensions of the active area are 100 x 100 microns with distance from the frontal margin of the plate 250 microns. This type of the probe is intended for the measurement of magnetic field components tangential to the sample surface. The overall dimensions are 5 x 4 x 0.7 mm. The probe is not packaged due to better adjustment of its center position.